Product List
Wuxi YaoTong Environmental Protection Machinery Co., Ltd.
Contact: Mr. Dai +86-188 6154 9818
+86-139 6175 2624
+86-139 6175 2624
Tel: +86-510-82725535
Fax: +86-510-82738019
E-mail: [email protected]
Add: No.22 Xingjie Road, Qianzhou Supporting Area, Huishan Economic Development Zone, Wuxi, China
Automatic soft water system
Automatic soft water system
Release date: 2017-10-25 16:51:23 Visits: 785
First, the system control instructions:
The water treatment system uses fully automatic control. Its control using the latest development of HY-type microcomputer controller control, together with the signal distributor, diaphragm valve, and other implementing agencies and various control instruments. Softening system regeneration operation is given by the flow meter signal regeneration, micro-computer controller and then control the corresponding device according to the signal distributor, and then by the distributor to control the diaphragm valve automatically complete the regeneration and operation of the equipment. In addition, HY-type microcomputer controller can ensure that the softening system will not appear at the same time the two equipment regeneration situation.
Set centralized control cabinet on the scene, the use of programmable logic controller, automatic control of renewable water pumps, salt pumps, salt metering tank level. Salt metering tank is located float level gauge, the control of salt pump start and stop, the salt liquid is low when the delay pump start adding salt solution. Stop the pump when the liquid level is high. At the same time, the level of the signal level as far as the control panel lights. and the salt metering box with electric ball valve, automatically shut down during the replacement process. The salt storage tank is provided with a float level gauge and automatic water replenishment valve, which automatically replenishes the soft water and ensures that the molten salt tank level is stable. Manual / automatic switch on the control panel, manual state, you can control the implementation of each component on the manual operation and action inspection. To ensure the safe operation of the entire system.
Second, the technical features:
? Fully automatic operation, no manual operation on duty, fundamentally eliminate all the waste caused by human factors and water quality fluctuations.
? The salt preparation system is reasonable and solves the problems of heavy workload, troublesome management and salt road blockage in salt addition.
? The system uses counter-current regeneration mode, reducing salt consumption, water consumption, improve water quality.
The water treatment system uses fully automatic control. Its control using the latest development of HY-type microcomputer controller control, together with the signal distributor, diaphragm valve, and other implementing agencies and various control instruments. Softening system regeneration operation is given by the flow meter signal regeneration, micro-computer controller and then control the corresponding device according to the signal distributor, and then by the distributor to control the diaphragm valve automatically complete the regeneration and operation of the equipment. In addition, HY-type microcomputer controller can ensure that the softening system will not appear at the same time the two equipment regeneration situation.
Set centralized control cabinet on the scene, the use of programmable logic controller, automatic control of renewable water pumps, salt pumps, salt metering tank level. Salt metering tank is located float level gauge, the control of salt pump start and stop, the salt liquid is low when the delay pump start adding salt solution. Stop the pump when the liquid level is high. At the same time, the level of the signal level as far as the control panel lights. and the salt metering box with electric ball valve, automatically shut down during the replacement process. The salt storage tank is provided with a float level gauge and automatic water replenishment valve, which automatically replenishes the soft water and ensures that the molten salt tank level is stable. Manual / automatic switch on the control panel, manual state, you can control the implementation of each component on the manual operation and action inspection. To ensure the safe operation of the entire system.
Second, the technical features:
? Fully automatic operation, no manual operation on duty, fundamentally eliminate all the waste caused by human factors and water quality fluctuations.
? The salt preparation system is reasonable and solves the problems of heavy workload, troublesome management and salt road blockage in salt addition.
? The system uses counter-current regeneration mode, reducing salt consumption, water consumption, improve water quality.
Previous: Chemical degreaser
Next: Desalinated water system